Suzuki SWIFT RS415 2017, Service Manual

Page: 418 / 1257

2B-8 Front Suspension:
5) Compare strut resistance and number of rebalance
on the right with those on the left. And they must be
equal in both. With proper strut, vehicle body should
come to stop the moments hands are off or after only
one or two small rebalances.
If conditions of struts are in doubt, compare them with
known-good vehicle or strut.
• Inspect bearing for wear, abnormal noise or gripping.
If defective, replace.
• Inspect spring seat for cracks or deformation.
If defective, replace.
• Inspect bump stopper for deterioration.
If defective, replace.
• Inspect rebound stopper and strut mount for wear,
cracks or deformation.
If defective, replace.
Front Wheel Hub and Steering Knuckle Components
S4RS0A2206009
Front Wheel Hub, Steering Knuckle and Wheel
Bearing Removal and Installation
S4RS0A2206010
Removal
1) Hoist vehicle and remove wheel.
2) Uncaulk drive shaft nut (1).
3) Depress foot brake pedal and hold it there. Remove
drive shaft nut (1).
4) Remove caliper carrier bolts.
5) Remove caliper (1) with carrier.
NOTE:
Hang removed caliper with a wire hook or the
like (3) so as to prevent brake hose (4) from
bending and twisting excessively or being
pulled.
Don operate brake pedal with pads removed.
I4RS0A220015-
1. Front wheel hub 4. Steering knuckle : 175 N
˜
m (17.5 kg-m, 126.5 lb-ft)
2. Circlip 5. Drive shaft nut
: Calk, after tightening.
: Do not reuse.
3. Wheel bearing
: Face grooved rubber seal side to wheel hub.
6. Hub bolt
I4RS0A220016-