Suzuki SWIFT RS415 2017, Service Manual

Page: 944 / 1257

8B-74 Air Bag System:
NOTE:
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components, ensure all components are properly mounted.
• Clear DTCs referring to “DTC Clearance: ”, if any.
• Repeat “Air Bag Diagnostic System Check: ” to confirm that the trouble has been corrected.
3 1) With ignition switch OFF, disconnect special tools (B)
and (C) then reconnect connector “L25” or “L30”.
2) Disconnect side-air bag (inflator) module connector (1)
from side-air bag (inflator) module.
3) Check proper connection to side-air bag (inflator)
module at terminal in connector.
4) If OK, then connect special tools (A), (B) and (C) to side-
air bag (inflator) connector.
Special tool
(A): 09932–76010
(B): 09932–75010
(C): 09932–78310
5) Check SDM DTC.
With ignition switch ON, is DTC B1061 or B1065 still
indicated?
DTC B1061: Repair
high resistance or open
in “WHT/RED” or “WHT/
GRN” wire circuit in seat
harness.
DTC B1065: Repair
high resistance or open
in “GRY/BLU” or “LT
GRN/RED” wire circuit
in seat harness. Replace side-air bag
(inflator) module
referring to “Side-Air
Bag (Inflator) Module
Removal and
Installation: ”.
Step Action Yes No
1
“L25”, “L30”
STEERING WHEEL
(B)
(C)
(A)
I4RS0A820034-