Suzuki SWIFT RS415 2017, Service Manual

Page: 483 / 1257

Brake Control System and Diagnosis: 4A-16
Brake Booster Inspection and Adjustment
S4RS0A4106018
Installation Position of Push Rod
If push rod clevis (1) has been removed, adjust distance
between booster installation surface (without including
packing) and the center of clevis pin hole to standard
value “a” and tighten nut (a) to specified torque.
Distance “a” between center of booster clevis pin
hole and booster surface
Standard:
114.5 – 115.5 mm (4.51 – 4.54 in.)
Tightening torque
Clevis lock nut (a): 15 N·m (1.5 kg-m, 11.0 lb-ft)
Specifications
Tightening Torque Specifications
S4RS0A4107001
NOTE:
The specified tightening torque is also described in the following.
“Front Brake Hose / Pipe Construction: ”
“Master Cylinder Components: ”
“Brake Booster Components: ”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information: in Section 0A”.
Special Tools and Equipment
Recommended Service Material
S4RS0A4108001
NOTE:
Required service material is also described in the following.
“Master Cylinder Components: ”
I4RS0A410022-
Fastening part
Tightening torque
Note
N
˜
m kg-m lb-ft
Front brake caliper bleeder plug 8.0 0.8 6.0 )
Rear wheel cylinder bleeder plug 7.5 0.75 5.5 )
Reservoir bolt 2.5 0.25 2.0 )
Master cylinder fixing nut 15 1.5 11.0 )
Brake pipe flare nut 16 1.6 11.5 )
Booster mounting nut 13 1.3 9.5 )
Brake pedal bracket mounting bolt 13 1.3 9.5 )
Clevis lock nut 15 1.5 11.0 )
Material SUZUKI recommended product or Specification Note
Brake fluid DOT 3 — (DOT 3) )