Suzuki SWIFT RS415 2017, Service Manual

Page: 422 / 1257

2B-12 Front Suspension:
Front Wheel Hub, Disc, Nut and Bearing Check
S4RS0A2206012
• Inspect each wheel disc for dents, distortion and
cracks.
A disc in badly damaged condition must be replaced.
• Check installation face inside of wheel disc for rust.
As rust affects adversely, remove it thoroughly.
• Check wheel nuts for tightness and, as necessary,
retighten them to specification.
• Check wheel bolt press-fitted into wheel hub for wear,
damage, poor thread condition, and looseness.
Replace defective bolt with a new one.
When bolt installation is found loose, replace both bolt
and wheel hub with new ones.
Tightening torque
Wheel nut (a): 85 N·m (8.5 kg-m, 61.5 lb-ft)
• Check wheel bearing for wear. When measuring
thrust play, apply a dial gauge to wheel hub.
Thrust play limit
0.1 mm (0.004 in.)
• By rotating wheel actually, check wheel bearing for
noise and smooth rotation.
If defective, replace bearing.
Suspension Control Arm / Bushing Removal
and Installation
S4RS0A2206013
Removal
1) Remove suspension control arm ball joint bolt (1)
and nut (2).
2) Remove suspension control arm bolts (1).
3) Remove suspension control arm (2).
Installation
1) Install suspension control arm as shown but tighten
new suspension control arm bolts (1) only
temporarily.
I2RH01220009-
I2RH01220010-
I2RH01220011-
I2RH01220046-
2
1
I4RS0A220026-