Suzuki SWIFT RS415 2017, Service Manual

Page: 980 / 1257

8B-110 Air Bag System:
Installation
1) Install passenger air bag (inflator) module to air bag
hole cover (2).
CAUTION:
Confirm claw (1) of passenger air bag
(inflator) module hangs in air bag hole cover
(2).
2) Install passenger air bag (inflator) module with air
bag hole cover (1) to instrument panel as shown.
3) Tighten passenger air bag (inflator) module attaching
bolts (1) to specified torque.
Tightening torque
Passenger air bag (inflator) module attaching
bolt (a): 23 N·m (2.3 kg-m, 16.5 lb-ft)
4) Connect passenger air bag (inflator) module
connector (1) securely as shown in figure.
a) Connect connector.
b) Lock connector with lock button (2).
5) Enable air bag system. Refer to “Enabling Air Bag
System: ”.
Passenger Air Bag (Inflator) Module Inspection
S4RS0A8206008
WARNING:
• Never measure resistance of passenger air
bag (inflator) module or disassemble it.
Otherwise personal injury may result.
• Never attempt to disassemble or repair the
passenger air bag (inflator) module. If any
abnormality is found, be sure to replace it
with new one as an assembly.
• Be sure to read “Precautions on Service
and Diagnosis of Air Bag System: ”,
“Precautions on Handling and Storage of
Air Bag System Components: ” and
“Precautions on Disposal of Air Bag and
Seat Belt Pretensioner: ” before starting to
work and observe every precaution during
work. Neglecting them may result in
personal injury or undeployment of the air
bag when necessary.
2
1
I4RS0A820064-
“ A ”
“ A ” “ A ”
1
I4RS0A820062-
1,(a)
I4RS0A820065-
1
2
a)
b)
I4RS0A820066-
I3RH0A820071-