Suzuki SWIFT RS415 2017, Service Manual

Page: 589 / 1257

Automatic Transmission: 5A-49
DTC P0717: Input / Turbine Speed Sensor Circuit Malfunction
S4RS0A5104024
Wiring Diagram
DTC Detecting Condition and Trouble Area
3 Check transmission fluid temperature circuit for IG
short
1) Cool down A/T fluid temperature under ambient
temperature.
2) Connect TCM connectors to TCM with ignition switch
OFF.
3) Turn ignition switch ON.
4) Measure voltage between terminal “C34-11” of TCM
connector and ground.
Is it 4.6 V or more?
“LT GRN” circuit shorted
to power circuit.
If circuit is OK, go to
Step 4. Intermittent trouble or
faulty TCM.
Check for intermittent
referring to “Intermittent
and Poor Connection
Inspection: in Section
00”.
If OK, substitute a
known-good TCM and
recheck.
4 Inspect transmission fluid temperature sensor
1) Inspect transmission fluid temperature sensor referring
to “Transmission Fluid Temperature Sensor Inspection:
”.
Is result satisfactory?
Intermittent trouble or
faulty TCM.
Check for intermittent
referring to “Intermittent
and Poor Connection
Inspection: in Section
00”.
If OK, substitute a
known-good TCM and
recheck. Replace transmission
fluid temperature
sensor.
Step Action Yes No
1. TCM 2. Input shaft speed sensor [A]: Terminal arrangement of TCM connector (viewed from harness side)
DTC detecting condition Trouble area
No input shaft speed sensor signal is detected although
output shaft speed sensor signals are detected. • Input shaft speed sensor or its circuit malfunction
• Improper input shaft speed sensor installation
• Damaged direct clutch drum
• Foreign material attachment to sensor or drum
• TCM
C35-6
2.5V
WHT
BLK
C35-16
1
2
C34
16
6
C35
[A]
I4RS0A510012-