Suzuki SWIFT RS415 2017, Service Manual

Page: 419 / 1257

Front Suspension: 2B-9
6) Pull brake disc (2) off by using two 8 mm bolts.
7) Pull out wheel hub (1) with special tools.
Special tool
(A): 09943-17912
(B): 09942-15511
CAUTION:
When wheel hub is removed, replace wheel
bearing with new one.
8) Disconnect tie-rod end (1) from steering knuckle (2)
with puller (3).
9) Remove wheel speed sensor (1) from knuckle (if
equipped with ABS).
10) Loosen strut bracket nuts (1).
11) Remove ball joint bolt (3) and nut (4).
12) Remove strut bracket bolts from strut bracket and
then steering knuckle (2).
13) Remove circlip from knuckle.
14) Using hydraulic press (1) and special tool, remove
wheel bearing.
Special tool
(A): 09913-75520
CAUTION:
When installing wheel bearing, replace it with
new one.
I2RH01220027-
I2RH01220028-
1
2
3
1
I4RS0A220017-
F: Forward
R: Rearward
1
I4RS0A220018-
I4RS0A220019-
I2RH01220033-