Suzuki SWIFT RS415 2017, Service Manual

Page: 334 / 1257

1E-5 Engine Lubrication System:
Oil Pan and Oil Pump Strainer Removal and
Installation
S4RS0A1506002
Removal
1) Remove oil level gauge.
2) Drain engine oil by removing drain plug.
3) Remove exhaust No.1 pipe (1), exhaust manifold
stiffener (2) and heated oxygen sensor No.1
(connector color: green) (3) referring to “Exhaust
System Components: in Section 1K”.
4) Remove clutch housing lower plate (1).
5) Remove oil pan and then oil pump strainer (1) from
cylinder block.
Installation
1) Install new O-rings (2) in the position as shown in the
figure and install oil pump strainer (1).
Tighten strainer bolt (3) first and then bracket bolt (4)
to specified torque.
Tightening torque
Oil pump strainer bolt (a): 11 N·m (1.1 kg-m, 8.0
lb-ft)
Oil pump strainer bracket bolt (b): 11 N·m (1.1
kg-m, 8.0 lb-ft)
2) Install dowel pin (1) to oil pan.
3) Apply sealant continuously to oil pan mating surface
as shown in the figure.
“A”: Sealant 99000–31260
Sealant amount for oil pan
Width “a”: 3 mm (0.12 in.)
Height “b”: 2 mm (0.08 in.)
2
1
3
I4RS0A150003-
1
I4RS0A150004-
I2RH0B150010-
I2RH0B150012-
I4RS0A150005-
I4RS0A150006-