Suzuki SWIFT RS415 2017, Service Manual

Page: 743 / 1257

Manual Transmission: 5B-34
7) Hold differential assembly with soft jawed vise (3),
install final gear (2) as shown in the figure and then
tighten bolts (1) to specified torque.
CAUTION:
Use of any other bolts than specified ones is
prohibited.
Tightening torque
Final gear bolt (a): 90 N·m (9.0 kg-m, 65.0 lb-ft)
Specifications
Tightening Torque Specifications
S4RS0A5207001
1
(A)
3
2 (B)
I3RM0B521025-
I4RS0A520043-
Fastening part
Tightening torque
Note
N
˜
m kg-m lb-ft
Transaxle oil drain plug 21 2.1 15.5 )
Transaxle oil level / filler plug 21 2.1 15.5 )
VSS bolt 5 0.5 4.0 )
Cable bracket bolt 55 5.5 40.0 )
Back up lamp switch 23 2.3 17.0 )
Gear shift guide case bolt 23 2.3 17.0 )
Select lever bracket bolt 23 2.3 17.0 )
Gear shift interlock bolt 50 5.0 36.5 )
5th to reverse interlock guide bolt 23 2.3 17.0 )
Countershaft nut 100 10.0 72.5 )
Shift fork bolt 10 1.0 7.5 )
Side cover bolt 10 1.0 7.5 )
Reverse gear shift lever bolt 23 2.3 17.0 )
Reverse shaft bolt 23 2.3 17.0 )
Transaxle case bolt 23 2.3 17.0 )
Side bearing retainer bolt 23 2.3 17.0 )
Gear shift locating bolt 13 1.3 9.5 )
Left case plate bolt 23 2.3 17.0 )
Oil gutter bolt 10 1.0 7.5 )
Final gear bolt 90 9.0 65.0 )