Suzuki SWIFT RS415 2017, Service Manual

Page: 535 / 1257

ABS: 4E-32
Front Wheel Speed Sensor Ring Removal and
Installation
S4RS0A4506012
NOTE:
The front wheel sensor ring can not be
removed or replaced alone. If front wheel
sensor ring needs to be replaced, replace it
as a wheel side joint assembly of drive shaft.
For removal and installation of wheel side joint assembly
of drive shaft, referring to “Front Drive Shaft
Disassembly and Assembly: in Section 3A”.
Rear Wheel Speed Sensor Ring On-Vehicle
Inspection
S4RS0A4506013
• Check ring serration (teeth) (1) for being missing,
damaged or deformed.
• Turn wheel and check if ring rotation is free from
eccentricity and looseness.
• Check that no foreign material is attached.
If any faulty is found, repair or replace.
Rear Wheel Speed Sensor Ring Removal and
Installation
S4RS0A4506014
For removal and installation of rear wheel speed sensor
ring, refer to “ABS Sensor Ring Removal and Installation
(If Equipped): in Section 4C”.
Specifications
Tightening Torque Specifications
S4RS0A4507001
NOTE:
The specified tightening torque is also described in the following.
“Front Wheel Speed Sensor Components Location: ”
“Rear Wheel Speed Sensor Components Location: ”
“ABS Hydraulic Unit / Control Module Assembly Components: ”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information: in Section 0A”.
1
I4RS0A450033-
Fastening part
Tightening torque
Note
N
˜
m kg-m lb-ft
Brake pipe flare nut 16 1.6 11.5 )
ABS hydraulic unit / control module assembly
bolt
9 0.9 6.5
)
ABS hydraulic unit / control module assembly
bracket bolt
25 2.5 18.0
)
Front wheel speed sensor bolt 25 2.5 18.0 )
Front wheel speed sensor harness clamp bolt 11 1.1 8.0 )
Rear wheel speed sensor bolt 11 1.1 8.0 )
Rear wheel speed sensor harness clamp bolt 11 1.1 8.0 )