226
E
7.3 ESQUEMA NEUMÁTICO PONYBENCH BEPLUS
El esquema funcional de la instalación neumática del PONYBENCH BEPLUS está compuesto por:
CBS
Cilindro de bloqueo de seguridad
S3
Selector de mando de los brazos
- Posición 1 Cierre brazos
- Posición 0 Neutral
- Posición 2 Apertura brazos
VRF
Válvula de regulación del fl ujo
EV1
Electroválvula de accionamiento del gato de
bloqueo de seguridad
CA-CB
Gatos movimiento brazos
CD-CE
Gatos movimiento brazos
P
Línea de alimentación
• FUNCIONAMIENTO
Cuando se acciona el interruptor de bajada puesto en
la consola del pupitre de mando, el aire comprimido
procedente del regulador - lubricador (no suministrado
- no se ve en el esquema) situado a la entrada de la línea
de alimentación (P) es enviado mediante la válvula de
tres vías (EV1) al gato (CBS) que acciona el gancho del
mecanismo de seguridad contra la caída, provocando el
desbloqueo del gancho.Al disparar el mando, la válvula
pone el conducto del aire en comunicación con la salida,
permitiendo así la activación automática del gancho de
seguridad mediante un muelle de retorno.
�
��
�
�
�
(S3) también presente en la consola del pupitre de mando,
se permite al aire comprimido que viene de la línea de
alimentación y pasa a través de la válvula reguladora de
fl ujo (VFR), llegar a las cámaras de los émbolos de los
gatos (CA-CB-CD-CE) provocando la apertura de los
brazos de apoyo del tapón. Por el contrario, si se gira en
sentido horario el selector/la válvula (S3) se alimentan los
gatos (CA-CB-CD-CE) por la otra entrada, accionando así
el cierre de los brazos de apoyo del tapón.
El grupo regulador - lubricador no es suministrado por el
Constructor porque es parte integrante de la instalación de
distribución del aire comprimido del taller.
¡ADVERTENCIA! La manumisión de la válvula
limitadora provoca graves daños: SPANESI
S.p.A. declina cualquier responsabilidad por
daños provocados a personas, animales o
cosas, debidos a la manumisión de la válvula.
Summary of Contents for PONYBENCH BEPLUS
