Siemens SIPART DR21, Manual

Page: 156 / 242

5 Operation
5.4 Configuration modes
Manual
156
SIPART DR21
C73000-B7476-C143-08
SIPART DR21
SIPART DR21 SIEMENS
SP-W
OUT-Y
C
PV
X
A1
A2
A3
A4
ADAPT
100
50
0
W
X
SP
W
no function
3
1
2
7 8
9
14
15
4, 5
6
19
11
12
13
16
17
18
Adjustment of parameter
value with rapid action
Setpoint w
Setpoint x
Adaptation LED: off
Shift key: no function
Parameter
name
tF, vv... c1...c7
Parameter
value
Exit key ↗ : Return to selection-
mode after onPA
Exit LED: flashes
Internal LED: current status
Manual LED: current status
Enter key ↗ : no function
Enter LED: off
Figure 5-3 Control and display elements in the configuration mode onPA
5.4.3 Configuration mode adaptation AdAP
This mode only appears in the selection mode S48 > 0 (with adaptation). The Enter function to
the AdAP configuration mode is only possible when the controller is in manual mode. For this
the structure switch S51 must be
≠
1 (see structure switch list, table 5-5, page 172). In the
parameterization mode AdAP, the controller influences the process online (but in manual opera-
tion).
A distinction is made between 4 different states in the AdAP configuration mode
- Pre adaptation,
- During adaptation,
- Aborted adaptation,
- Post adaptation
In pre- and post-adaptation the digital displays and the keys are used for the parameter display
and setting as is the case in the parameterization mode and structuring mode onPA or oFPA.
The complete process image as described in chapter 5.2, page 150 is displayed during adapta-
tion.
In the case of aborted adaptation the error message flashes in the digital w/xdisplay (3). The
error messages are acknowledged with the Enter key (11) (see figure 5-5, page 160).