Parameters for configuration "4 AI I 2WIRE HART", "4 AI I 4WIRE HART"
Table 13-34 Parameters for configuration "4 AI I 2WIRE HART", "4 AI I 4WIRE HART"
Parameter
Range of values
Default
Applicability
4 AI I 2WIRE HART
4 AI I 4WIRE HART
Process alarm (when limit value exceeded)
● enabled
● disabled
disabled
Channel
Measuring range
---
● Disabled
● 4 mA to 20 mA
● HART
HART
Channel
---
Measuring range
● Disabled
● 0 mA to 20 mA
● 4 mA to 20 mA
● HART
HART
Channel
Group diagnostics
● enabled
● disabled
enabled
Module
Overflow/underflow diagnostics
● enabled
● disabled
enabled
Module
Smoothing
● None
● Low
● Average
● Strong
None
Channel
High limit
Lower to upper limit
value of the over-range
(SIMATIC S7)
High limit
Channel
Low limit
Lower to upper limit
value of the over-range
(SIMATIC S7)
Low limit
Channel
Diagnostics: wire break
● enabled
● disabled
enabled
Channel
Diagnostics: wire break
---
● enabled
● disabled
enabled
Channel
Analog electronic modules
13.11 Parameters of the analog electronic modules
ET 200iSP
318
Operating Instructions, 11/2017, A5E00247483-07