Setting Measurement Conditions
3-20
3
[5] Image settings
What follows is a description of how to use the image settings to control the measuring program.
(1) Pixel contraction and detection precision (gray scale processing)
Measurement condition setting screen
Measurement programs which are affected by these settings
Positional deviation measurement (gray scale search), degree of match inspection, lead
inspection, multiple position measurement, and multiple degree of match inspection.
MEAS CND
1
DTECT PRECISION STANDARD
STANDARD
HIGH PRECISION
REG COND
5
CONTR. PIXL(MDL0)
1
The display will change from 1 to 2 to 3
using the up and down arrow keys.
Note: At the "DETAIL" item in the upper function menu,
select "CONTR.PIXEL." Then, "
5
or
9
CONTR.PIXL" will appear on the screen.
High precision
pixel detection
Pixel
Camera image
Standard pixel
detection
Point of detection
Point of detection
Menu
Description
1
DTECT
PRECISION
(detection
precision)
59
CONTR.
PIXL
(Grey search
scale conditions)
- STANDARD (standard): Detection precision of 1 pixel unit
level
- HIGH (High precision): Detection precision of 1/10 pixel
unit level
- 1: Search the scanned image in groups of 2 pixels.
- 2: Search the scanned image in groups of 4 pixels.
- 3: Search the scanned image in groups of 8 pixels.
- To increase the speed of your search, you must take into account the settings listed below.
1. When using the high precision setting, a smaller image should be used.
2. Reduce the size of the scanned image.
3. After considering what the maximum out of position dimension would be, make the
search area as small as possible.
4. If the size of the object is larger than 8 pixels then set the pixel contraction to "3."
Reference image
(Standard)
Search coordinates
use a 1 pixel level
of precision
(High precision)
Search coordinates use a
sub-pixel level of precision (1/10)
Degree of
match
Degree of
match
0
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
