Setting Measurement Conditions
3-12
3
1
UP. L
(248,232)
2
LO. R
(263,247)
3
MOVE
4
REG
COLOR F C1 BRT
RECTANGLE RESET RETURN
X:248 Y:232
After the colors are registered, the
"REGISTRATION WAS COMPLETED"
message appears.
REGISTRATION WAS COMPLETED.
([SET] KEY ON)
Press the SET key again, the selected area is
converted to binary, and this color is registered
as extraction color number 0.
FINE ADJUSTMENT
On "
FINE ADJUSTMENT (TO NEXT SUB-
MENU)" line, press the SET key to enter the
sub-menu screen.
The screen shows "HUE," "CHROMA," (color
saturation) and "BRIGHT LEV" of the registered
extracted color with numeric values and graphs.
Dotted lines on each graph are upper and lower
limits, and the solid line is the center value.
Ex.: Change "
START POINT" of hue.
Increase value of the "
START POINT" of
hue and the start point of the hue and chroma
(saturation) graph moves. The center value
also changes accordingly.
Select "
CENTR" and"
END POINT" and
change numeric values so that each position
can be shifted.
By moving "
CENTR," both start and end
points slide accordingly.
Note: To extract and covert to binary wider
range hue, set start and end points of hue
wider.
1
EXTRACT COLOR NO0 (0
〜
7)
[HUE]
2
START POINT
080.0 (0
〜
359)
3
CENTR
250.0 (0
〜
359)
4
END POINT
060.0 (0
〜
359)
[CHROMA]
5
U. LM
130.0 (0
〜
255)
6
CENTR
120.0 (0
〜
255)
7
L. LM
110.0 (0
〜
255)
[BRIGHT LEVEL]
8
U. LM
130.0 (0
〜
255)
9
CENTR
120.0 (0
〜
255)
0
L. LM
110.0 (0
〜
255)
[COLOR
DETECT]
SET
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
COLOR F C1 BRT
FINE ADJUSUTMENT SCREEN SAVE
1
EXTRACT COLOR NO0 (0
〜
7)
[HUE]
2
START POINT
080.0
(0
〜
359)
3
CENTR
250.0 (0
〜
359)
4
END POINT
060.0 (0
〜
359)
[CHROMA]
5
U. LM
130.0
(0
〜
255)
6
CENTR
120.0 (0
〜
255)
7
L. LM
110.0 (0
〜
255)
[BRIGHT LEVEL]
8
U. LM
130.0 (0
〜
255)
9
CENTR
120.0 (0
〜
255)
0
L. LM
110.0 (0
〜
255)
[COLOR
DETECT]
SET
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
COLOR F C1 BRT
FINE ADJUSUTMENT SCREEN SAVE
