Sharp IV-C35M, User Manual

Page: 306 / 383

21-21
Setting the Input/Output Conditions
21
[HUE]
1
START POINT 127 (0 〜 255)
2
CENTR 117 (0 〜 255)
3
END POINT 116 (0 〜 255)
[CHROMA]
4
U. LM 019 (0 〜 255)
5
CENTR 014 (0 〜 255)
6
L. LM 010 (0 〜 255)
[BRIGHT LEVEL]
7
U. LM 082 (0 〜 255)
8
CENTR 079 (0 〜 255)
9
L. LM 075 (0 〜 255)
[COLOR DETECT]
SET
=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=POPUP
COLOR F C1 BRT FINE ADJUSUTMENT SCREEN SAVE
[HUE]
1
START POINT 127 (0 〜 255)
2
CENTR 115 (0 〜 255)
3
END POINT 103 (0 〜 255)
[CHROMA]
4
U. LM 019 (0 〜 255)
5
CENTR 014 (0
〜
255)
6
L. LM 010 (0
〜
255)
[BRIGHT LEVEL]
7
U. LM 082 (0
〜
255)
8
CENTR 079 (0
〜
255)
9
L. LM 075 (0
〜
255)
[COLOR DETECT]
SET
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
COLOR F C1 BRT FINE ADJUSUTMENT SCREEN SAVE
1
SIZE Y008 (1 〜 480) X X008 (1 〜 512)
2
EVALUATION MAJORITY
3
EVAL-SPEC (RATIO %) 050
4
UP. L COORD MOVE (248, 232)
5
COLOR FINE ADJ. (TO NEXT SUB-MENU)
SET
=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
COLOR F C1 BRT CCD TRIG COND SCREEN SAVE REG
HUE (START PNT080 END PNT060)
CHROMA (U.LM130 L.LM110)
BRIGHT L (U.LM130 L.LM110)
(4) When color detection is selected
SIZE
EVALUATION
EVAL-SPEC (RATIO %)
UP. L COORD
COLOR FINE ADJ.
On " FINE ADJUSTMENT" line, press the SET
key to enter the sub-menu screen.
The screen shows "HUE," "CHROMA," (color
saturation) and "BRIGHT LEV" of the registered
extracted color with numeric values and graphs.
Dotted lines on each graph are upper and lower
limits, and the solid line is the center value.
Ex.: Change " START POINT" of hue.
Increase value of the " START POINT" of
hue and the start point of the hue and chroma
(saturation) graph moves. The center value
also changes accordingly.
Select "
CENTR" and" END POINT" and
change numeric values so that each position
can be shifted.
By moving "
CENTR," both start and end
points slide accordingly.
Note: To extract and covert to binary wider
range hue, set start and end points of hue
wider.
For details, see
page 21-19.