15-11
Multiple Positional Measurement
1 5
1 5
1 5
1 5
1 5
Display the measurement results
Return to the operation screen and press the TRG/BRT key. The measurement results will be dis-
played on the screen.
REGISTER NO
K=006
OK
DTECT NO.
000（000〜005）
X=102.0
Y=257.0
Register number
Number of points detected
●
An example of the display when "gray search" is selected.
Detected point coordinate.
Numbered in the order detected
(range)
*3
*3 When "EDGE DTECT" is selected, the "SCAN-
ORDER" will be automatically selected on the
"
4
DETECT ORDER" line.
* 1 The detection order can be set to either "SCAN-ORDER " or "MATCH LVL" on item "
4
DETECT
ORDER" on the "MEAS CND" screen.
-
See page 15-3.
* 2 The inspection number corresponds to the image of the solid line.
*2
COLOR F C1 BRT
V*.**
(TYPE00)
OK
MEAS XXXXms 2001-10-14 10:38
MEASUREMENT 1 MULTI-POSI
REGISTER NO.0(0~3)
K=004
OK
DETECT NO.000(000
〜
003)
M=+09870
OK
X=236.0
Y=163.0
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
X0
〜
7
□□□□□□□□
Y0
〜
7
□□□□□□□□
READY
□
Final evaluation result
Measuring time
Measuring program number
Register number
Number of detected images
Numbered in the order detected (range)
*1
Degree of match
Detected point coordinates
- Move the cursor to "CHG-REG (change register)"
and press the up key. The measurement result
display will change in the following order: Register
No. 0 (detection No. 000 -> 001-> (...) -> (...) ->
Register No. 3 (...) -> Register No. 0 (...) -> (...),
and so will the measurement screen. Press the
down key to change the display, moving through
the items in reverse order.
●
An example of the display when "gray search" is selected.
