Sharp IV-C35M, User Manual

Page: 191 / 383

12-3
Color Unevenness Inspection
12
REGISTER NO.
Select register number to measure. When
making color unevenness inspection, you
can select any register from 0 to 3 (a total of
4 registers).
REGISTER EXIST
Select whether to register or not.
REGISTER NO. ( MEAS OBJECT)
Register setting conditions are shown for each register
number. Circles mean that "REGISTER EXIST" has set to
"YES."
How to set the register conditions
How to enter the REG-COND setting screen
There are three methods for getting to the REG-COND setting screen.
1) On the "MEA-CND" setting screen, move the
cursor to the " MEAS OBJECT" and press
the SET key. The cursor will move into the
table. Move the cursor to the "
○ " column and
press the SET key.
Note: If you press the SET key in the "X"
column, the setting will be invalid.
1
REGISTER NO. 0 (0 〜 3)
2
REGISTER EXIST YES
REGISTER NO.
3
MEAS OBJECT
EXTRACT COLOR
SET =VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
COLOR F C1 BRT MEA-CND SCREEN COND SAVE
YES
NO
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
× × ×
× × × ×
× ○ × ×
× ○ × ×
00010203040506070809101112131415
1
REGISTER NO. 0 (0 〜 3)
2
REGISTER EXIST YES
REGISTER NO.
3
MEAS OBJECT
EXTRACT COLOR
SET =VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
COLOR F C1 BRT MEA-CND SCREEN COND SAVE
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
× × ×
× × × ×