manualshive.com logo in svg

Renesas SH7041 Series, Hardware Manual, Page: 493 / 923

Share
Download
Renesas SH7041 Series Hardware Manual Download Page 493

455

Section 13   Watchdog Timer (WDT)

13.1

Overview

The watchdog timer (WDT) is a 1-channel timer for monitoring system operations. If a system
encounters a problem (crashes, for example) and the timer counter overflows without being
rewritten correctly by the CPU, an overflow signal (

WDTOVF

) is output externally. The WDT

can simultaneously generate an internal reset signal for the entire chip.

When the watchdog function is not needed, the WDT can be used as an interval timer. In the
interval timer operation, an interval timer interrupt is generated at each counter overflow. The
WDT is also used in recovering from the standby mode.

13.1.1

Features

• 

Works in watchdog timer mode or interval timer mode.

• 

Outputs 

WDTOVF

 in the watchdog timer mode. When the counter overflows in the watchdog

timer mode, overflow signal 

WDTOVF

 is output externally. You can select whether to reset

the chip internally when this happens. Either the power-on reset or manual reset signal can be
selected as the internal reset signal.

• 

Generates interrupts in the interval timer mode. When the counter overflows, it generates an
interval timer interrupt.

• 

Clears standby mode.

• 

Works with eight counter input clocks.

Summary of Contents for SH7041 Series




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments