Renesas SH7041 Series, Hardware Manual, Page: 483 / 923

445
12.9.3 Pin Configuration
Table 12.18 shows the POE pins.
Table 12.18 Pin Configuration
Name Abbreviation I/O Description
Port output enable input pins
POE0
–
POE3
Input Input request signals to make high-
current pins high-impedance state
Table 12.19 shows output-level comparisons with pin combinations.
Table 12.19 Output Level Comparisons
Pin Combination I/O Description
PE09/TIOC3B and
PE11/TIOC3D Output All high-current pins are made high-impedance
state when the pins simultaneously output low-level
for longer than 1 cycle.
PE12/TIOC4A and
PE14/TIOC4C/DACK0/
AH
Output All high-current pins are made high-impedance
state when the pins simultaneously output low-level
for longer than 1 cycle.
PE13/TIOC4B/
MRES
and
PE15/TIOC4D/DACK1/
IRQOUT
Output All high-current pins are made high-impedance
state when the pins simultaneously output low-level
for longer than 1 cycle.
12.9.4 Register Configuration
The POE has the two registers shown in table 12.20. The input level control/status register (ICSR)
controls both
POE0
–
POE3
pin input signal detection and interrupts. The output level
control/status register (OCSR) controls both the enable/disable of output comparison and
interrupts.
Table 12.20 Input Level Control/Status Register Configuration
Name Abbreviation R/W Initial Value Address Access Size
Input level control/status
register ICSR R/(W)
*
1
H'0000 H'FFFF83C0
H'FFFF83C1 8, 16, 32
Output level
control/status register OCSR R/(W)
*
2
H'0000 H'FFFF83C2
H'FFFF83C3 8, 16, 32
Notes: * 1 Only 0 writes to bits 15–12 are possible to clear the flags.
*
2 Only 0 writes to bits 15 are possible to clear the flags.