Renesas SH7041 Series, Hardware Manual, Page: 161 / 923

123
UBAMRL:
Bit: 15 14 13 12 11 10 9 8
UBAMRL UBM15 UBM14 UBM13 UBM12 UBM11 UBM10 UBM9 UBM8
Initial value: 0 0 0 0 0 0 0 0
R/W: R/W R/W R/W R/W R/W R/W R/W R/W
Bit: 7 6 5 4 3 2 1 0
UBAMRL UBM7 UBM6 UBM5 UBM4 UBM3 UBM2 UBM1 UBM0
Initial value: 0 0 0 0 0 0 0 0
R/W: R/W R/W R/W R/W R/W R/W R/W R/W
•
UBAMRH Bits 15–0—User Break Address Mask 31–16 (UBM31–UBM16): These bits
designate whether to mask any of the break address 31–16 bits (UBA31–UBA16) established
in the UBARH.
•
UBAMRL Bits 15–0—User Break Address Mask 15–0 (UBM15–UBM0): These bits
designate whether to mask any of the break address 15–0 bits (UBA15–UBA0) established in
the UBARL.
Bits 15 – 0: UBMn Description
0 Break address UBAn is included in the break conditions (initial value)
1 Break address UBAn is not included in the break conditions
Note: n = 31–0
7.2.3 User Break Bus Cycle Register (UBBR)
User break bus cycle register (UBBR) is a 16-bit readable/writable register that selects from
among the following four break conditions:
1. CPU cycle/ DMAC/DTC cycle
2. Instruction fetch/data access
3. Read/write
4. Operand size (byte, word, longword)
Resets and hardware standbys initialize the UBBR to H'0000. It is not initialized in software
standby mode.