Renesas SH7041 Series, Hardware Manual, Page: 139 / 923

101
6.1.3 Pin Configuration
Table 6.1 shows the INTC pin configuration.
Table 6.1 Pin Configuration
Name Abbreviation I/O Function
Non-maskable interrupt input pin NMI I Input of non-maskable interrupt
request signal
Interrupt request input pins
IRQ0
–
IRQ7
I Input of maskable interrupt request
signals
Interrupt request output pin
IRQOUT
O Output of notification signal when an
interrupt has occurred
6.1.4 Register Configuration
The INTC has the 10 registers shown in table 6.2. These registers set the priority of the interrupts
and control external interrupt input signal detection.
Table 6.2 Register Configuration
Name Abbr. R/W Initial Value Address Access Sizes
Interrupt priority register A IPRA R/W H'0000 H'FFFF8348 8, 16, 32
Interrupt priority register B IPRB R/W H'0000 H'FFFF834A 8, 16, 32
Interrupt priority register C IPRC R/W H'0000 H'FFFF834C 8, 16, 32
Interrupt priority register D IPRD R/W H'0000 H'FFFF834E 8, 16, 32
Interrupt priority register E IPRE R/W H'0000 H'FFFF8350 8, 16, 32
Interrupt priority register F IPRF R/W H'0000 H'FFFF8352 8, 16, 32
Interrupt priority register G IPRG R/W H'0000 H'FFFF8354 8, 16, 32
Interrupt priority register H IPRH R/W H'0000 H'FFFF8356 8, 16, 32
Interrupt control register ICR R/W
*
1
H'FFFF8358 8, 16, 32
IRQ status register ISR R(W)
*
2
H'0000 H'FFFF835A 8, 16, 32
Notes:
*
1 The value when the NMI pin is high is H'8000; when the NMI pin is low, it is H'0000.
* 2 Only 0 can be written, in order to clear flags.