Physio Control LIFEPAK 20 Service Manual Download Page 238

Page: 238 / 370

LIFEPAK 20/20e Defibrillator/Monitor

Replacement Procedures

Boardstack

(continued)

A10 SpO2 Module
Removal

Note:

Remove the following assemblies before beginning this disassembly:

–

Boardstack assembly

(optional removal)

To remove the SpO2 Module:
1. Remove the Nomex shield (262) by removing the two nuts (161) and

washers (264).

2. Remove and discard the four 4-40



0.312 screws (252) from the A10 SpO2

Module.

3. Lift the A10 SpO2 Module away from the boardstack assembly.

A10 SpO2 Module
Installation

To Install the A10 SpO2 Module:

Note:

Order correct SpO2 module replacement kit for the LIFEPAK 20 device.

1. Position the A10 SpO2 Module into position over the A06 OEM PCB.
2. Install four new 4-40



0.312 screws (252) into the A10 SpO2 Module; torque

to 6.8 in-lb.

3. Install the Nomex shield (262) by securing it to the A06 OEM PCB with the

two washers (264) and nuts (161); torque to 6.8 in-lb.

4. Complete the process by

Installing the front case

9-82

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Search results

Summary of Contents for LIFEPAK 20

Reviews:

Brands by name

Popular brands

Physio Control LIFEPAK 20, Service Manual

Search results

Summary of Contents for LIFEPAK 20

Reviews:

Brands by name

Popular brands