Physio Control LIFEPAK 20 Service Manual Download Page 278

Page: 278 / 370

LIFEPAK 20/20e Defibrillator/Monitor Replacement

Procedures

Bottom Case

(continued)

A13 Energy Capacitor
Removal

Note:

Remove the following assemblies before beginning this disassembly:

To remove the A13 Energy Capacitor:
1. If the boardstack assembly was not removed, remove and discard the screw

and ground cable (221).

2. Disconnect the W10 Power/Therapy Cable from the A04 Therapy PCB at

J17.

3. Pull the boardstack assembly away from the printer shroud (89) and the

power module.

4. Disconnect the W07/A13 Capacitor Discharge Cable from the A04 Therapy

PCB at J2.

WARNING

SHOCK HAZARD.

Carefully follow disassembly instructions to avoid a shock or

causing damage to wires during disassembly.

(Continued on next page)

9-122

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Search results

Summary of Contents for LIFEPAK 20

Reviews:

Related manuals for LIFEPAK 20

Brands by name

Popular brands

Physio Control LIFEPAK 20, Service Manual

Search results

Summary of Contents for LIFEPAK 20

Reviews:

Related manuals for LIFEPAK 20

Brands by name

Popular brands