manualshive.com logo in svg

Physio Control LIFEPAK 20, Service Manual

Share
Download
Physio Control LIFEPAK 20 Service Manual Download Page 79

Previous Page

Table of Contents

Section Contents

Back

Index

Next Page

LIFEPAK 20/20e Defibrillator/Monitor 

Modes of Operation

AED Mode

 

In AED mode (the default setting), the device automatically evaluates the patient 
rhythm to determine if a shock is needed and prompts the user to press the 

SHOCK

 button to deliver a shock.

The device can be reconfigured to turn on in 

manual mode

, if desired.

To set options for AED mode, display the 

SETUP

 menu and select 

AED MODE

. 

AED mode options include energy protocol, voice prompts, ECG display, CPR 
time, and others. For a complete description of the options available, refer to the 

Defining Setup Options

 section in the operating instructions.

Note:

If configured to turn on in AED mode, opening the door on the device 
turns off AED mode and places the device in 

manual mode

. Closing the 

door does not restart AED mode operation. To restart AED mode, press 

ANALYZE 

or cycle the device power.

4-4

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands