Physio Control LIFEPAK 20 Service Manual Download Page 81

Page: 81 / 370

LIFEPAK 20/20e Defibrillator/Monitor

Modes of Operation

Setup Mode

(continued)

Displaying the Setup
Menu

To display the

SETUP

menu:

1. Press and hold the

OPTIONS

and

EVENT

buttons, and then press the

button. When the

ENTER PASSCODE

overlay appears, release the buttons.

The

SPEED DIAL

LED illuminates, indicating that the

SPEED DIAL

is active.

2. To enter the passcode, rotate the

SPEED DIAL

to select a number and then

press the

SPEED DIAL

. As a number is selected, it changes to an asterisk for

passcode protection, and the next digit in line highlights.

Note:

The factory default passcode (

0000

) or the reserved technician

passcode (

5433

LIFE

) can be used in place of other passcodes to gain

access to the

SETUP

and

SERVICE

menus.

3. When you have entered the passcode, press the

SPEED DIAL

. The

SETUP

menu appears. The

PASSCODE INCORRECT-TRY AGAIN

message appears if

an incorrect passcode is entered.

To exit the

SETUP

menu, turn the device OFF.

(Continued on next page)

4-6

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Search results

Summary of Contents for LIFEPAK 20

Reviews:

Related manuals for LIFEPAK 20

Brands by name

Popular brands

Physio Control LIFEPAK 20, Service Manual

Search results

Summary of Contents for LIFEPAK 20

Reviews:

Related manuals for LIFEPAK 20

Brands by name

Popular brands