manualshive.com logo in svg

Physio Control LIFEPAK 20, Service Manual

Share
Download
Physio Control LIFEPAK 20 Service Manual Download Page 283

Previous Page

Table of Contents

Section Contents

Back

Index

Next Page

LIFEPAK 20/20e Defibrillator/Monitor Replacement 

Procedures

Bottom Case 

(continued)

A03 Power Module 
Removal 

(continued)

 

4. Pull the boardstack assembly away from the printer shroud and power 

module.

5. If replacing the power module, 

remove the A13 Energy Capacitor 

(complete steps 6 through 9).

6. Remove and discard the forward right 4-40 

 0.312 screw (173) that secures 

the right side of the power module and grounding harness (221).

Note:  

Remove the grounding harness (221) as you remove the right forward 

screw. Replace the grounding harness if broken or frayed.

7. Remove and discard the forward left 4-40



0.312 screw (173) that secures 

the left side of the power module.

8. Loosen the rear 4-40



0.312 screw (173) that secures the right rear corner 

of the power bracket three turns. 

9. Tilt the left side of the power module up, clearing the loosened screw, and 

remove it from the bottom case.

Parts List 

Interconnect Diagram

Module View

Connectors View

Main Assemblies

9-127

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands