manualshive.com logo in svg

Physio Control LIFEPAK 20, Service Manual

Share
Download
Physio Control LIFEPAK 20 Service Manual Download Page 13

Previous Page

Table of Contents

Section Contents

Back

Index

Next Page

LIFEPAK 20/20e Defibrillator/Monitor 

Preface

Service Information 

Before attempting to clean or repair any assembly in the device, the service 
technician should be familiar with the information provided in the 

Preventive 

Maintenance

 section of this manual.

A 

qualified service technician

 should inspect any device that has been 

dropped, damaged, or abused to verify that the device is operating within 
performance standards listed in the Performance Inspection Procedure (PIP), 
and that the leakage current values are acceptable.

Replacement procedures

 for the device are limited to those items accessible at 

the subassembly level. Replacements and adjustments must be made by 
qualified service personnel. Replacements at the subassembly level simplify 
repair and servicing procedures and help ensure correct device operation and 
calibration. Printed circuit board assemblies that require software may require 
installation by a Physio-Control Service representative. 
To obtain Physio-Control service and maintenance for your device, contact your 
local service or sales representative. In the USA, call Physio-Control Technical 
Support at 1.800.442.1142. Outside the USA, contact your local Physio-Control 
representative.

1-12

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands