manualshive.com logo in svg

Physio Control LIFEPAK 20, Service Manual

Share
Download
Physio Control LIFEPAK 20 Service Manual Download Page 12

Previous Page

Table of Contents

Section Contents

Back

Index

Next Page

LIFEPAK 20/20e Defibrillator/Monitor 

Preface

Device Tracking 

 Device Tracking: 

The U.S. Food and Drug Administration requires defibrillator manufacturers and 
distributors to track the location of their devices. If your device has been sold, 
donated, lost, stolen, exported, or destroyed, or if it was not obtained directly 
from Physio-Control, please notify the device-tracking coordinator at 
1.800.426.4448. Refer to your operating instructions for more information 
concerning device tracking.

!USA

1-11

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands