Physio Control LIFEPAK 20 Service Manual Download Page 90

Page: 90 / 370

LIFEPAK 20/20e Defibrillator/Monitor

Modes of Operation

Service Mode

(continued)

Resetting the
Maintenance Prompt

After completing scheduled maintenance, reset the maintenance prompt counter
to clear the

MAINTENANCE DUE

message and begin the count for the next

scheduled maintenance.
To turn off or reset the scheduled maintenance prompt:
1. Display the

SERVICE

menu.

2. Select

MAINT PROMPT

. The

SERVICE/MAINT PROMPT

menu appears, showing

the current prompt date for scheduled maintenance.

3. Select

RESET

. The prompt date is revised to the next scheduled maintenance

date.

4. Turn the device OFF.

4-15

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Search results

Summary of Contents for LIFEPAK 20

Reviews:

Brands by name

Popular brands

Physio Control LIFEPAK 20, Service Manual

Search results

Summary of Contents for LIFEPAK 20

Reviews:

Brands by name

Popular brands