manualshive.com logo in svg

Physio Control LIFEPAK 20, Service Manual

Share
Download
Physio Control LIFEPAK 20 Service Manual Download Page 85

Previous Page

Table of Contents

Section Contents

Back

Index

Next Page

LIFEPAK 20/20e Defibrillator/Monitor 

Modes of Operation

Setup Mode 

(continued)

Creating a Passcode 

■

ARCHIVES ACCESS

 – Set the device to any of the following protocols (refer to 

the table above):
1. Allow unlimited access to archives mode and allow records to be deleted.
2. Require a password to enter archives mode, but allow records to be 

deleted.

3. Allow unlimited access to archives mode, but require a password to delete 

records.

4. Require a password to enter archives mode and delete records setup

 

MODE

 – Create a new passcode to access the 

SETUP

 menu. The 

ENTER 

PASSCODE

 overlay appears with the first digit highlighted. Rotate the 

SPEED DIAL

 to select digits.

■

ARCHIVES MODE

 – Create a passcode to enter archives mode. The 

ENTER 

PASSCODE

 overlay appears with the first digit highlighted. Rotate the 

SPEED 

DIAL

 to select digits.

■

DELETE RECORDS

 – Create a passcode to delete records in archives mode. 

The 

ENTER PASSCODE

 overlay appears with the first digit highlighted. Rotate 

the 

SPEED DIAL

 to select digits.

4-10

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands