Physio Control LIFEPAK 20 Service Manual Download Page 156

Page: 156 / 370

LIFEPAK 20/20e Defibrillator/Monitor

Battery Maintenance

Discarding/Recycling Batteries

A battery should be considered to be at end of its useful life if one or more of the
following circumstances occur:

■

There is physical damage to the battery.

■

The battery is leaking.

■

The battery charges to 80% or less of full charge capacity.

Recycle batteries according to national and local regulations. Contact
Physio-Control Technical Support for assistance at 1.800.442.1142, or refer to

www.physio-control.com/recycling

for disposal instructions.

WARNING!

Risk of fire, explosion, and burns.

Do not recharge, disassemble, crush,

heat above 100°C (212°F), incinerate, or mistreat batteries.

8-5

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Search results

Summary of Contents for LIFEPAK 20

Reviews:

Related manuals for LIFEPAK 20

Brands by name

Popular brands

Physio Control LIFEPAK 20, Service Manual

Search results

Summary of Contents for LIFEPAK 20

Reviews:

Related manuals for LIFEPAK 20

Brands by name

Popular brands