background image

INSTRUCTIONS

FIELD-ADJUSTABLE SR™ INSTALLATION

RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi  cient LED lighting and controls that make it easy for electricians to install

and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]

Fig: 3

IMPORTANT

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

RAB fi xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is 
required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON 
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. 

WARNING: Disconnect or turn OFF power at the electrical panel before installing or maintaining fi xture. No User serviceable 
parts inside fi xture.
Suitable for damp locations. Suitable for operation in ambient not exceeding 50°C.

SURFACE MOUNTING

The fi xture is suitable for indoor ceiling mounting, as follows:
1. 

Press and hold the 

Release Buttons 

(4) 

on both sides of the 

Fixture Housing

 to release the 

Lens

(Fig. 1)

. When pressing the 

Release Buttons 

use one hand to hold the

 Lens 

and press the 

Release Buttons 

on both sides of the 

Fixture

 with the other hand.                         

CAUTION: The Lens may drop out quickly. Lens 

is supported 

with 

(2)

Tether Cables

(Fig. 3).

2. 

Attach both 

Junction Box Cover Plates

 to the 

Fixture Housing 

by 

sliding in the direction of arrows as shown in Fig. 2. Secure with 

(2) 

Screws

(provided)

3.  Feed supply wires through 

Wire Access Hole

. Secure

 Fixture 

Housing

 to the junction box or building structure per NEC 

Code

(Fig. 3)

4. 

Make electrical connections as shown in wiring diagram

(Fig. 12)

. Use approved wiring connectors and wire to local NEC 

codes. Push all wires back into

 Fixture Housing

. Be careful not to 

pinch wires.

5. 

Snap 

Lens 

back into 

Fixture Housing 

and remove protective 

plastic from 

Lens

.

WARNING: To prevent wiring damage or abrasion, do not expose 

wiring to sharp objects.

Lens

Release Buttons 

(4)

Fixture Housing

Screws 

(4)

Junction  Box                  

Cover Plates

Tether Cables

 (2)

Wire Access Hole

Fixture Housing

Lens

SR2

SR4

SR8

Fig: 2

Fig: 1

Screws 

(2)

Reviews: