manualshive.com logo in svg

Physio Control LIFEPAK 20, Service Manual

Share
Download
Physio Control LIFEPAK 20 Service Manual Download Page 255

Previous Page

Table of Contents

Section Contents

Back

Index

Next Page

LIFEPAK 20/20e Defibrillator/Monitor 

Replacement Procedures

Boardstack 

(continued)

A01 System PCB 
Installation

To install the A01 System PCB:
1. If you are replacing the A01 System PCB, ensure that the plastic standoff 

(149) is correctly positioned, large end up, on the A01 System PCB.

2. Insert the 8-pin stack connector (135) into the A04 Therapy PCB at J15.
3. Carefully position the A01 System PCB over the PCB support bracket (139), 

and slide it down the support bracket standoffs. As the A01 System PCB 
slides down, ensure that the support bracket standoffs and the pins on the 
8-pin and 60-pin stack connectors seat with their connectors evenly.

4. Install five new threaded standoffs (129), long end up, into the support 

bracket.

Note:  

Do not install a screw in the insulated standoff in the lower right 

corner at this time.

5.

Replace the coin battery

 if needed.

6. Install the PCB shield (127) by sliding it down the five threaded standoffs on 

the A01 System PCB. 

139

129

149

(x5)

(Continued on next page)

Parts Lists

Interconnect

System View

Therapy View

Main Assemblies

9-99

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands