Physio Control LIFEPAK 20 Service Manual Download Page 201

Page: 201 / 370

LIFEPAK 20/20e Defibrillator/Monitor

Replacement Procedures

Front Case

(continued)

A11 Active Display
Installation

To install the A11 Active Display:
1. Verify the condition of the following parts and replace if necessary:

–

A08 Backlight Inverter (

see illustration 1

)

–

W15 Active Display Cable (

see illustration 3

)

–

W17 Backlight Inverter Cable (

see illustration 1

)

–

Display bracket (47) (

see illustration 1

)

–

Thermal conductive pad (201), located on the top inside edge of the top
case.

Note: The thermal conductive pad is only required when using A08

Backlight Inverter - 3202033.

The thermal conductive pad must be

positioned flush against the outer edge of the front case (past the ends of
the locator notches in the front case)

2. Replace the thermal conductive pad (201), if necessary, by peeling away the

old pad, removing any remaining adhesive, and applying the new pad to the
upper inside edge of the top case, centered between the locator notches.

bottom edge

201

outer edge

illustration 2

Only required with Backlight
Inverter - 3202033

(Continued on next page)

9-45

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Search results

Summary of Contents for LIFEPAK 20

Reviews:

Related manuals for LIFEPAK 20

Brands by name

Popular brands

Physio Control LIFEPAK 20, Service Manual

Search results

Summary of Contents for LIFEPAK 20

Reviews:

Related manuals for LIFEPAK 20

Brands by name

Popular brands