manualshive.com logo in svg

Physio Control LIFEPAK 20, Service Manual

Share
Download
Physio Control LIFEPAK 20 Service Manual Download Page 172

Previous Page

Table of Contents

Section Contents

Back

Index

Next Page

LIFEPAK 20/20e Defibrillator/Monitor 

Replacement Procedures

Saving the Setup Configuration

The following procedures describe how to save the device setup configuration 
before beginning any repair action. 

■

If the device owner has a LIFENET System account, then use the LIFENET 
Device Agent application to manage setup configurations.

■

Another method is to transfer the setup configuration to a spare device, 
complete repairs, and then transfer the setup configuration back again. 

■

The final method is to print the setup configuration, complete repairs, and 
then manually reconfigure the device.

Note:

Saving the configuration by transferring it to a spare device requires that 
both devices have the same software version. Otherwise, potentially 
unexpected results may occur when the configuration is restored to the 
repaired device. Verify that copyright dates are the same on the 
introduction page of both devices.

9-16

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands