manualshive.com logo in svg

Physio Control LIFEPAK 20, Service Manual

Share
Download
Physio Control LIFEPAK 20 Service Manual Download Page 203

Previous Page

Table of Contents

Section Contents

Back

Index

Next Page

LIFEPAK 20/20e Defibrillator/Monitor 

Replacement Procedures

Front Case 

(continued)

A11 Active Display 
Installation 

(continued)

8. A11 Active Display - 3309555, route display backlight wires together around 

black strain relief features. Extend excess wires to the right, straight across 
the top of the display.

9. Position the A11 Active Display inside the display bracket.
10. A11 Active Display - 3205278, route the backlight wires from display along 

the corner and under the hook and then back to the A08 Backlight Inverter.

11. Connect the A11 Active Display wires to the A08 Backlight Inverter at J2.
12. Place the active display bracket assembly in position in the front case. (If 

replacing the Active Display, remove the clear protective cover prior to 
installing it into the front case.)

Note:  

A08 Backlight Inverter - 3202033 must make contact with the thermal 

conductive pad (201) on the front case.

13. Place the two grounding harnesses (219) onto the top two screws (173); 

torque to 6.8 in-lb. Refer to 

Grounding Harnesses Orientation 

for 

grounding harness placement. 

(Continued on next page)

Parts List

Interconnect

Front Case View

Rear View

Main Assemblies

9-47

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands