manualshive.com logo in svg

Physio Control LIFEPAK 20, Service Manual

Share
Download
Physio Control LIFEPAK 20 Service Manual Download Page 230

Previous Page

Table of Contents

Section Contents

Back

Index

Next Page

LIFEPAK 20/20e Defibrillator/Monitor 

Replacement Procedures

Boardstack 

(continued)

Boardstack Removal 

(continued)

12. Disconnect the W05 SpO2 Flex Cable from the A06 OEM/SpO2 Assembly at 

J54 by first removing the screw (255) using a 3/32 allen driver.

13. Disconnect the W06 ECG wire harness from the A02 PP PCB at J23.
14. Disconnect the W25 Speaker Harness Extension Cable from the 

A01 System PCB at J5.

15. Lift the boardstack assembly away from the bottom case.
16. Disconnect the A14 Inductive Resistor’s cable from the A04 Therapy PCB 

at J1.

17. Remove and discard the two 4-40 

 0.312 screws (173) that connect the A14 

Inductive Resistor to the EMI shield (274) and PCB support bracket (139).

18. Remove the boardstack assembly from the bottom case.

CAUTION

Possible component damage. 

The OEM/SpO2 flex cable is secured to 

locking posts. Remove the plug and the locking post simultaneously to avoid 
damage to the connector.

Parts Lists

Interconnect

System View

Therapy View

Main Assemblies

9-74

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands