Physio Control LIFEPAK 20 Service Manual Download Page 178

Page: 178 / 370

LIFEPAK 20/20e Defibrillator/Monitor

Replacement Procedures

Top Case

Top Case Removal

To remove the top case:
1. Disconnect the device from ac power.
2.

Remove the A07 Battery

from the device.

3. Place the device face down.
4. Remove and discard the two 6-32



0.375 screws (169) securing the bottom

case to the front case.

5. Remove and discard the 6-32



1.75 screws (167) securing the bottom case

to the top case.

6. Place the device on its bottom.
7. Remove and discard the two 6-32



1.75 screws (167) securing the top case

to the front case (outboard screws).

8. Pull the front case slightly away from the top case, and slide the top case up

and away from the rest of the device.

Discharge the A13 Capacitor

169

167

Parts List

Main Assemblies

9-22

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Search results

Summary of Contents for LIFEPAK 20

Reviews:

Related manuals for LIFEPAK 20

Brands by name

Popular brands

Physio Control LIFEPAK 20, Service Manual

Search results

Summary of Contents for LIFEPAK 20

Reviews:

Related manuals for LIFEPAK 20

Brands by name

Popular brands