manualshive.com logo in svg

Oracle X7-8, Service Manual

Share
Download
Oracle X7-8 Service Manual Download Page 55

Clear Hardware Fault Messages (Oracle ILOM)

Managing Server Hardware Faults Through the

Oracle ILOM Fault Management Shell

The Oracle ILOM Fault Management Shell enables Oracle Services personnel to view and

manage fault activity on a managed servers and other types of devices.

For more information about how to use the Oracle ILOM Fault Management Shell, see the

Oracle ILOM User's Guide for System Monitoring and Diagnostics Firmware Release 4.0.x

 in

the Oracle Integrated Lights Out Manager (ILOM) 4.0 Documentation Library at 

http://www.

oracle.com/goto/ilom/docs

.

Caution - 

The purpose of the Oracle ILOM Fault Management Shell is to help Oracle Service

personnel diagnose system problems. Customers should not launch this shell or run fault

management commands in the shell unless requested to do so by Oracle Service personnel.

Troubleshooting Using a CMOD Fault Remind Test

Circuit

The CMODs have an internal test circuit that you can use to locate failed DIMMs and

verify a failed CPU after removing the CMOD from the server. The DIMM and CPU Fault

Remind circuits hold an electrical charge for 10 minutes after power is removed from the

server, allowing enough time to remove the CMOD and use the circuit. Each CMOD has a

motherboard-mounted Fault Remind button. The button is part of the CMOD Fault Remind

circuit. The circuit is charged and allows you to identify a failed DIMM or CPU after the

CMOD has been removed for the server. You must remove the CMOD from the front panel to

access the button.

For more information, see 

“Identify and Remove a Faulty DIMM” on page 189

 and 

“Identify

and Remove a Faulty Processor” on page 171

.

Troubleshooting System Cooling Issues

Maintaining the proper internal operating temperature of the server is crucial to the health of the

server. To prevent server shutdown and damage to components, address over temperature and

hardware-related issues as soon as they occur. If your server has a temperature-related fault, use

the information in the following table to troubleshoot the issue.

Troubleshooting and Diagnostics

55

Summary of Contents for X7-8





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands