Oracle X7-8, Service Manual

Page: 24 / 308

Identifying Components
Call
Out
Component Link
13 SMOD0 System A NET0-3
Four 10 GbE Network ports labeled NET0, NET1, NET2, and NET3
“System Module (SMOD)
Overview” on page 34
“Networking Subsystem” on page 87
“Servicing System Module (SMOD) Components
(FRU)” on page 195
14 PCIe card slots 1 (right) through16 (left)
PCIe card slots 1 (right) through16 (left):Dual PCIe card carriers (DPCC)
contain one or two PCIe cards. One DPCC populates two PCIe card slots.
SMOD0 System A: DPCC 3, DPCC 2, DPCC 1, DPCC 0; SMOD1 System
B: DPCC 4, DPCC 5, DPCC 6, DPCC 7
“PCIe Card and DPCC Overview” on page 149
“PCI Devices Subsystem” on page 88
“Dual PCIe Card Carrier (DPCC)
Indicators” on page 70
15 AC power block
AC inputs with cable clips (AC 0 through AC 3 ):
SMOD0 System A: AC 3 (Top), AC 2 ; SMOD1 System B: AC 1, AC 0
(bottom)
“Chassis Back Panel
Components” on page 43“Power
Subsystem” on page 83
“AC Power Block Inlet Indicators” on page 71
Note -
The server does not provide video display ports on the SMODs. Use Oracle ILOM
rKVMS to display video.
Identifying Components
These sections describe the components of the server and provide information about identifying
and servicing replaceable components.
■
“Illustrated Parts Breakdown” on page 24
■
“Customer-Replaceable Units” on page 26
■
“Field-Replaceable Units” on page 27
■
“Component Serviceability Requirements” on page 26
Illustrated Parts Breakdown
The following illustration identifies the major components of the server.
24 Oracle Server X7-8 Service Manual • October 2017