Oracle X7-8 Service Manual Download Page 296

Page: 296 / 308

Monitoring System Components

Guide for Configuration and Maintenance Firmware Release 4.0.x

in the Oracle Integrated

Lights Out Manager (ILOM) 4.0 Documentation Library at

http://www.oracle.com/goto/

ilom/docs

Component Names are displayed by Diagnostic Software. The tables in this section identify

the system components and describe the naming conventions applied to the components of the

Oracle Server X7-8

Each section corresponds to an IPMI entity ID and lists sensors, indicators, and field-

replaceable units (FRUs) related to that entity. The tables contain the following fields:

■

Component Name

– Shows the user-visible component name used in management

interfaces to refer to a specific sensor, indicator, or FRU. The IPMI name is a shortened

form of the component name, and is indicated by the

boldface

portion of the component

name.

■

IPMI Type

– Indicates the type of sensor, indicator, or FRU represented.

■

Description

– Describes the particular component name reference.

■

Values

– Defines the states of the sensor, indicator, or FRU entity, and any specific units or

values that are expected, if applicable.

Note -

Some component names are hidden in the Oracle ILOM user interfaces. These names

are marked as hidden in the tables. See the ILOM 4.0 Documentation Library at

http://www.

oracle.com/goto/ilom/docs

Related Information

■

Oracle Integrated Lights Out Manager (ILOM) 4.0 Documentation Library at:

http://www.

oracle.com/goto/ilom/docs

Monitoring System Components

This section includes information for the following server components:

■

“System Components (FRUs) Network Access Control (NAC) Names” on page 297

■

“System Indicators Network Access Control (NAC) Names” on page 298

■

“System Sensors Network Access Control (NAC) Names” on page 300

296

Oracle Server X7-8 Service Manual • October 2017

Summary of Contents for X7-8





















































































































































































































































































































Search results

Summary of Contents for X7-8

Reviews:

Brands by name

Popular brands

Oracle X7-8, Service Manual

Search results

Summary of Contents for X7-8

Reviews:

Brands by name

Popular brands