manualshive.com logo in svg

Oracle X5-4, Service Manual

The Oracle X5-4 is a powerful and versatile server, designed for high-performance computing. To get acquainted with its features and functionalities, make sure to download the free "Getting Started Manual" from our website. This comprehensive manual will provide you with all the necessary information to maximize your experience with the Oracle X5-4.

Share
Download
background image

BIOS Setup Utility Menu Options

This section describes the Basic Input/Output System (BIOS) Setup Utility.

Note - 

For more information about BIOS, refer to the 

Oracle X5 Series Servers Administration

Guide

 at 

http://www.oracle.com/goto/x86AdminDiag/docs

.

Description

Link

BIOS basics and screens

“About the BIOS Setup Utility” on page 273

BIOS screens

“Access the BIOS Setup Utility” on page 338

About the BIOS Setup Utility

The server's Basic Input/Output System (BIOS) is stored on the motherboard and managed

using the BIOS setup utility. The utility reports system information and provides a graphical

user interface that allows you to change the server BIOS settings from the factory-configured

defaults.

The BIOS has two operational boot modes, Legacy and UEFI. Changing modes changes the

content of some utility screens. The legacy boot mode is the default.

For a listing of the BIOS Setup Utility menus, see 

“Legacy Mode BIOS Setup Utility

Screens” on page 274

.

BIOS Setup Utility Screens

This section contains screen captures of the higher-level BIOS Setup Utility menus.

■

“Legacy Mode BIOS Setup Utility Screens” on page 274

BIOS Setup Utility Menu Options

273

Summary of Contents for X5-4







































































































































































































































































































































































Reviews:

No comments

Related manuals for X5-4

IBM 8835 - Eserver 325 - 1 GB RAM User Manual preview
8835 - Eserver 325 - 1 GB RAM
Brand: IBM Pages: 68
IBM 6C1 Technical Overview And Introduction preview
6C1
Brand: IBM Pages: 42
NAIM UNITISERVE - Quick Start Manual preview
UNITISERVE -
Brand: NAIM Pages: 18
TYAN FS65-B5521 Service Engineer'S Manual preview
FS65-B5521
Brand: TYAN Pages: 136
Olive Olive 4 HD Quick Start Manual preview
Olive 4 HD
Brand: Olive Pages: 19
Fujitsu PRIMERGY TX2540 M1 Operating Manual preview
PRIMERGY TX2540 M1
Brand: Fujitsu Pages: 92
Fujitsu PRIMERGY TX200 S5 Operating Manual preview
PRIMERGY TX200 S5
Brand: Fujitsu Pages: 114
Fujitsu PRIMERGY TX300 S5 Options Manual preview
PRIMERGY TX300 S5
Brand: Fujitsu Pages: 142
Fujitsu PRIMERGY TX200 S6 Operating Manual preview
PRIMERGY TX200 S6
Brand: Fujitsu Pages: 126
Fujitsu Server PRIMERGY TX1330 M1 Upgrade And Maintenance Manual preview
Server PRIMERGY TX1330 M1
Brand: Fujitsu Pages: 336
Fujitsu PRIMERGY TX300 S6 Options Manual preview
PRIMERGY TX300 S6
Brand: Fujitsu Pages: 122
Fujitsu SE300 Operating Manual preview
SE300
Brand: Fujitsu Pages: 86
Fujitsu S120 Series Operating Manual preview
S120 Series
Brand: Fujitsu Pages: 109
Fujitsu PRIMERGY TX200 S5 Options Manual preview
PRIMERGY TX200 S5
Brand: Fujitsu Pages: 110
Fujitsu PRIMERGY TX300 S5 Operating Manual preview
PRIMERGY TX300 S5
Brand: Fujitsu Pages: 118
Fujitsu S140 User Manual preview
S140
Brand: Fujitsu Pages: 115
Fujitsu PRIMERGY TX200 S7 Operating Manual preview
PRIMERGY TX200 S7
Brand: Fujitsu Pages: 90
Fujitsu PRIMERGY TX200 S6 Options Manual preview
PRIMERGY TX200 S6
Brand: Fujitsu Pages: 124

Brands by name

Popular brands

Load more brands