Oracle X5-4, Service Manual

Page: 161 / 358

Remove a PCIe Card
Remove a PCIe Card
When servicing the components in this section, unplug the AC power cords and use ESD
protection.
Caution -
Component damage. Ensure that all power is removed from the server before
removing or installing expansion cards. You must disconnect the power cables before
performing this procedure.
Before You Begin ■
For serviceability considerations, see “Component Serviceability” on page 70 .
■
For PCIe slot designation information, see “Component Designations” on page 73 .
1. Prepare for service.
See “Prepare the Server for Cold Service” on page 94 .
2. Locate the PCIe card that you want to remove.
See “Server Back Panel Features” on page 18 for information about PCIe slots and their
locations.
3. If are replacing a PCIe card with a card of the same type, make a note of where
the PCIe card is installed.
A list of supported PCIe cards and their population order is listed in the Product Notes for the
server.
4. Unplug all data cables from the PCIe card.
Make note of the cables, so you can install them in the same connectors on the replacement
card.
Servicing CRU Components 161