manualshive.com logo in svg

Oracle X5-4, Service Manual

The Oracle X5-4 is a powerful and versatile server, designed for high-performance computing. To get acquainted with its features and functionalities, make sure to download the free "Getting Started Manual" from our website. This comprehensive manual will provide you with all the necessary information to maximize your experience with the Oracle X5-4.

Share
Download
background image

Prepare the Server for Cold Service

b.   

(Optional) Release and reposition the CMA to access to the back of the

server.

See 

“Release the CMA” on page 98

.

c.   

At the front of the server, release the slide rails by pushing the two green

latches inward.

d.   

Slowly pull the server forward until both slide rails lock at the fully extended

maintenance position.

The locking action is accompanied by an audible click. The server is now in the

maintenance position and ready for service.

5.

(Optional) Remove the server entirely from the rack.

See 

“(Optional) Remove the Server from the Rack” on page 99

.

6.

Set up an ESD-safe service location.

Preparing to Service the Server

97

Summary of Contents for X5-4







































































































































































































































































































































































Reviews:

No comments

Related manuals for X5-4

IEI Technology PUZZLE-IN003A User Manual preview
PUZZLE-IN003A
Brand: IEI Technology Pages: 89
IBM System x3250 M3 Type 4251 Manual preview
System x3250 M3 Type 4251
Brand: IBM Pages: 32
Axel AX3000/M85 Installation Manual preview
AX3000/M85
Brand: Axel Pages: 28
Arris VMS1100 Self-Install Manual preview
VMS1100
Brand: Arris Pages: 6
3onedata NP301 User Manual preview
NP301
Brand: 3onedata Pages: 24
LOVATO ELECTRIC DME Series Manual preview
DME Series
Brand: LOVATO ELECTRIC Pages: 5
AXIOMTEK NA-100 Hardware Installation Manual preview
NA-100
Brand: AXIOMTEK Pages: 45
Kramer KDS-8-MNGR User Manual preview
KDS-8-MNGR
Brand: Kramer Pages: 72
D-Link AirPlus G DP-G301 Quick Installation Manual preview
AirPlus G DP-G301
Brand: D-Link Pages: 18
ClearCube CD8620 series User Manual preview
CD8620 series
Brand: ClearCube Pages: 5
Black Box ServTray KVT201A-JP-R3 User Manual preview
ServTray KVT201A-JP-R3
Brand: Black Box Pages: 18
Axis AXIS 5900 User Manual preview
AXIS 5900
Brand: Axis Pages: 160
Multitech MultiAccess MULTIACCESS MA30120 User Manual preview
MultiAccess MULTIACCESS MA30120
Brand: Multitech Pages: 179
Supermicro SuperStorageSystem SSG-2028R-DN2R40L User Manual preview
SuperStorageSystem SSG-2028R-DN2R40L
Brand: Supermicro Pages: 84
QNAP NAS TS-877XU-RP-3600-8G-US Quick Installation Manual preview
NAS TS-877XU-RP-3600-8G-US
Brand: QNAP Pages: 12
QNAP Nextephive User Manual preview
Nextephive
Brand: QNAP Pages: 15
Supero SC835XTQ - R982B User Manual preview
SC835XTQ - R982B
Brand: Supero Pages: 80
Supero SUPER SUPERSERVER 6026TT-BIBQF User Manual preview
SUPER SUPERSERVER 6026TT-BIBQF
Brand: Supero Pages: 104

Brands by name

Popular brands

Load more brands