![background image](http://html1.mh-extra.com/html/omron/nj501-1300/nj501-1300_user-manual_742205174.webp)
8 Homing
8-8
NJ-series CPU Unit Motion Control User’s Manual (W507)
Set the home input detection direction. Refer to
on page 8-7 for details on the
relationship between the homing start direction and the home detection method.
Set the holding time when you set the Homing Method to the proximity reverse turn and holding time
specification. This is the time from when the home proximity input signal (i.e., from when deceleration
starts) until home is defined.
Set the home input mask distance in command units when you set the Homing Method to the proximity
reverse turn/home input mask distance. This is the distance from when the home proximity input signal
(i.e., from when deceleration starts) until home is defined.
After home is defined, relative positioning is performed at the set value to adjust the position of home.
This homing compensation is performed at the homing compensation velocity.
Adjusting the workpiece is sometimes difficult after home is defined. The homing compensation can be
used to fine-tune the position of home after it is determined. This is useful when you cannot easily
replace the home proximity sensor or when home has moved after a motor replacement.
Home Input Detection Direction
Homing Holding Time
Home Input Mask Distance
Homing Compensation Value
ON
OFF
Command
output
Torque limit is continued even
after the set time elapses.
Positive direction
Stops.
Start
Homing approach velocity
Stops.
Positive direction
Homing approach velocity
Home is defined when the set time elapses.
Start
Homing velocity
Homing velocity
Torque limit
Command torque from previous operation
Negative
direction
Negative
direction
Homing velocity
Home proximity
input signal
Home input detection direction
ON
OFF
ON
OFF
After the proximity input, movement is according to
the home input mask distance.
Positive direction
Stops.
Homing approach velocity
Start
Negative
direction
Homing velocity
Command
output
Home input signal
Home proximity
input signal
Home input detection direction
Summary of Contents for NJ501-1300
