Omron CJ1W-AD041-V1, Operation Manual

Page: 35 / 427

12
Function Applications Section 1-3
CJ-series PLCs
1-3 Function Applications
AD081
MA
CH
No.
x10 1
x10
0
RUN
ERC
ERH
ADJ
MOD
E
12
AD081
MA
CH
No.
x10 1
x10
0
RUN
ERC
ERH
ADJ
MOD
E
12
Remove the label after the
wiring has been completed.
Function Application Page
Mean value processing Performs a smooth conversion when the input fluctuation is too extreme.
Example: Removes noise interference from data such as flow/pressure.
55, 254
Peak value hold Holds the maximum value that has been read.
Holds the data that is less than the maximum value.
58, 257
Disconnection detection Detects disconnection of input signals. 59, 258
Output hold Holds the output signal at the previous value for certain conditions, such as
errors. 152, 261
Holds the output signal in the lower-limit value or 0 V for certain conditions,
such as errors.
Holds the output signal in the upper-limit value for certain conditions, such
as errors.
Ratio conversion Uses the Analog I/O Unit as a gradient setting device for setting ratio and
bias. 262
Offset gain adjustment Adjusts the offset and gain, and uses the I/O functions. 60, 153, 265