Mitsubishi Electric MELSEC Q Series, User Manual

Page: 260 / 834

5 - 140
Chapter 5 Data Used for Positioning Control
Setting item Setting details
[Cd.16] Inching movement amount

Use this data item to set the amount of movement by inching.

The machine performs a JOG operation if "0" is set.

Set a value within the following range:
[Pr.1] Unit
setting
mm
(

10
-1
µm)
inch
(

10
-5
inch)
degree
(

10
-5
degree)
PLS
(PLS)
Setting range 0 to 65535 0 to 65535 0 to 65535 0 to 65535
Fetch cycle: At start
[Cd.17] JOG speed

Use this data item to set the JOG speed.

The setting value range differs according to the "[Pr.1] Unit setting".
[Pr.1] Unit
setting
mm
(

10
-2
mm/min)
inch
(

10
-3
inch/min)
degree
(

10 -3 degree/min)
PLS
(PLS/s)
Setting range
1 to
2000000000
1 to
2000000000
1 to
2000000000
1 to 1000000000
: When "[Pr.83] Speed control 10 x multiplier setting for degree axis" is valid,
this will be the setting range
1
to 2000000000 (

10
-2
degree/min).
Fetch cycle: At start
[Cd.18] Interrupt request during
continuous operation

To interrupt a continuous operation, set "1" to this data item.

After processing the interruption request ("1"), the Simple Motion module
automatically resets the value to "0".
Fetch cycle: Operation cycle