Minolta CF5001 User Manual Download

Page: 315 / 432

Setting E.K.C. Function (continued)

11-13

To change Password, Name, or Limit:

(1) Click on the number of the data to be edited.

The E.K.C. Edit Setting window will be displayed.

(2) Change the password, name, or limit, as desired. For details in entering

procedure, refer to p. 11-11.

(3) Click on [

Registration

To clear the text boxes, click on [

Reset

To cancel editing the E.K.C. data, click on any E.K.C. Function Setting menu
item to jump to the desired window.

DETAILS: Error Message

See “Details” on p. 11-11 if an error message is displayed after clicking on
[

Registration

Summary of Contents for CF5001

















































































































































































































































































































































































































































Search results

Summary of Contents for CF5001

Reviews:

Related manuals for CF5001

Brands by name

Popular brands

Minolta CF5001, User Manual

Search results

Summary of Contents for CF5001

Reviews:

Related manuals for CF5001

Brands by name

Popular brands