manualshive.com logo in svg

Minolta CF5001, User Manual, Page: 86 / 432

Share
Download
Minolta CF5001 User Manual Download Page 86

3-18

Copying Using Special Paper (Multi-Sheet Bypass Tray)

Use the Multi-sheet bypass tray to copy using special (non-standard) paper.
Select the special paper type and weight from the selections previously specified by
the Key Operator, then select the size to be loaded on the Multi-sheet bypass tray,
as described below.

OHP film or ink-jet paper cannot be used on this machine. DO NOT load the
OHP films and ink-jet papers into the Multi-sheet bypass tray.

8.5”x11”R and B6R sizes (unavailable in Tray 1 to 4) can be used in the Multi-
sheet bypass tray. Also, 210~256 g/m

2

 paper can be used in the Multi-sheet

bypass tray.

• To specify the combinations of special paper type and weight to be

selected for the Multi-sheet bypass tray, see p. 14-23.

• To specify the special paper type, weight and size in Tray 1 to 4 to be used

on a regular basis, see p. 14-21 to p. 14-22.

1.

Open the Multi-sheet bypass tray, and load the copy paper.

See p. 2-26 for further details of loading procedure.
For the specifications of paper in the Multi-sheet bypass tray, see p. 12-2 to p.
12-8.

2.

Touch the Multi-sheet bypass tray key in the PAPER SIZE area of 
the Basic Screen to highlight it.

The 

TYPE/SIZE

 key will appear under the bypass tray key, 

APS

 will be

deselected, and 

AMS

 will be highlighted on the Basic Screen.

3.

Touch 

TYPE/SIZE

.

The Paper Type/Size popup menu will be displayed.

Summary of Contents for CF5001

















































































































































































































































































































































































































































Reviews:

No comments